Transfer Pumps

Pump for Beer Transfers More Details
	Transfer fermented, but uncarbonated, beer from carboy to carboy or from carboy to keg For those brewers that perhaps cannot lift a carboy or have issues with siphoning this is a great solution Self-priming (will push air) so that it can draw out of a carboy or tank Gentle diaphram action so as to not ""beat up"" the beer Made of food-grade, NSF approved, materials polypropylene and santoprene, so no metallic interaction with the product
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $139.00* $149.00* N/A* 7.00 lbs* N/A* Yes*

March High Flow Pump More Details
	Included bracket for mounting 6 ft. power cord with plug wired in for easy use Maximum flow of just over 7 gpm (at zero head) Maximum head of 18 feet (at zero flow) 1/2 ft. mpt fittings on both inlet and outlet. Materials in contact with solution: Polysulfone, 316 stainless steel, silicone rubber, Ryton and Teflon 1/25 hp, continuous-duty, thermal overload protected, single phase 1.4 Amp motor Motor is fan cooled Will handle internal pressures to 50 psi. Face unscrews and rotates at 90 degree intervals to adjust to your application.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $159.95* $N/A* N/A* 6.00 lbs* N/A* Yes*

March Pump Stainless Steel More Details
	A Stainless Steel pump housing is food-grade and nearly indestructible Stainless steel housing Stainless steel is professional breweries material of choice because it is a durable, food-grade metal that can withstand caustic chemicals and be effectively sanitized Since it is magnetic drive, it is not self priming, you must put the pump under the level of the liquid source We wanted the pump to be brewer friendly so we had March install a bracket so that it can be mounted
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $395.00* $N/A* N/A* 5.00 lbs* N/A* Yes*

March Nano Brewery Pump More Details
	Designed for the small 'Nano' commercial brewery, but you don't yet need a full on expensive professional brewery pump The March Nano Brewery Pump features a robust flow rate of 17 GPM with all the benefits brewers have come to expect from March magnetic drive pumps Those features include the ability to throttle back flow and the use of food-grade materials where the beer is in contact with the pump
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $349.00* $N/A* N/A* 10.00 lbs* N/A* No*

March Pump Polysulphone 230V More Details
	Featuring a 230V motor for customers from Europe, Australia, New Zealand, etc. Does not come with the 6 ft. cord or the built-in base Has a 3 ft. cord to which you will need to wire the appropriate plug
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $179.95* $N/A* N/A* 6.0 lbs* N/A* Yes*

March Pump Polysulphone Assembly More Details
	This is a replacement assembly for our March High Temperature pump It has the polysulphone head and the impeller as well Please note this will not work as a replacement for the newer high Flow pump.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $74.95* $N/A* N/A* 0.00 lbs* N/A* Yes*

Stainless Pump Mounting Bracket More Details
	Our own stainless mounting bracket allows you to slide in one of our March pumps for easy control of pump Has two pre-drilled holes for attaching to brewing stand, cart, etc..
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $21.95* $N/A* N/A* .25 lbs* N/A* Yes*

March Pump Head Replacement More Details
	A replacement head that fits the Polysulphone pump This is only the plastic head, no impeller
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $32.95* $N/A* N/A* .80 lbs* N/A* Yes*

March Pump Gasket Replacement More Details
	A replacement o-ring for the mag drive pump
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $3.25* $N/A* N/A* 0.00 lbs* N/A* Yes*

March High Temperature Pump More Details
	We wanted the pump to be brewer friendly so we had March install a bracket so that it can be mounted We also had a 6 ft. power cord with plug wired in for easy use This is a tough little pump with a 1/25 hp, continuous-duty 1.4 Amp motor which can be run non-stop for extended periods This pump has a maximum flow of 7.2 gpm with a maximum head of 12 feet
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $149.99* $N/A* N/A* 6.0 lbs* N/A* No*

Chunky Pump Large Volume More Details
	Chunky Pump Cart Inoxpa oversized pump head with 2 in. tri-clover fittings 3.5 hp German Gear Reduction Motor AC Tech Frequency Drive in water tight Nema 4x brushed stainless case Non-Marking, gray, pneumatic tires Stainless Fittings Tray 30 ft. Remote with potentiometer speed control and 3 way reversing switch Built in 220 volt plug and 50 foot cord
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $3,145.00* $N/A* N/A* 200 lbs* 2 Years* No*

*When you click on the "More Info" button you can read about the latest Transfer Pumps.