All Grain Equipment

The following is a selection of all grain brewing coolers and equipment for home brewing including Mash Tuns, Lauter Tuns, Hot Liquor Tanks and Beverage Coolers.

Best Selling All Grain Equipment This Week

Brew in a Bag (BIAB) Kettle Kit

8.5 gallon economy kettles with 1/2" FPT fittings

1/2" stainless steel ball valve

stainless hex nipple

1/2" stainless steel barb

Stainless steel pluig for thermometer port

MB_BE650
$124.99

The Brew Bag for Kettles

Available to fit ANY size kettle

Use again and again - NOT a throw away bag

2" loops for lifting - either by hand or with a pulley and a hook

Holds over 100 pounds of grain

Smooth seams on the interior enable quick cleaning

BIABKETTLE
$30.00

10 Gallon ThermoBarrel

Insulated Stainless Steel Mash Tun

Recirculation port and thermometer port

Ports 1/2" NPT and 3/8" NPT compatible

Torpedo tube and 3-piece ball valve included

*Cannot be directly heated from an external source

TB10G2
$199.99

The Brew Bag For Coolers

Use again and again - NOT a throw away bag

2" loops for lifting - either by hand or with a pulley and a hook

Holds over 100 pounds of grain

Smooth seams on the interior enable quick cleaning

All strapping intersections are reinforced with "X" stitching

BIABCOOLER
$30.00

The Brew Bag for Keggles

This bag fits American Sanke kegs with at least an 11" opening

Use again and again - not a throw-away bag

2" loops for lifting either by hand or with a pulley and hook

Holds over 100 pounds of grain

Use it as your hop bag - but it must be suspended above the kettle bottom

BIABKEGGLE
$30.00

10 Gallon Igloo Cooler

10 GALLON Cooler

Super tough plastic construction. Thick foam insulation keeps wort hot.

Quikgrip handles

342-4101
$65.00

Mash Tun Brew Kettle

15.5 Gallon Capacity

Ultimate Mash tun Brew Kettle

Reconditioned Legal keg kettle

Two welded 1/2 inch ports, top cut

SS false Bottom with supports for maximum efficiency

99-0065
$279.00

10 Gallon Converted Mash Tun

10 Gallon Converted Igloo Cooler Mash Tun With False Bottom.

Converted 10 Gallon igloo cooler mash Tun with Stainless Steel false bottom.

Stainless tube to ball valve.

The converted igloo makes all grain brewing a breeze.

99-2682
$159.99

5 Gallon Converted Mash Tun

5 Gallon Converted Igloo Cooler Mash Tun with False Bottom.

Converted 5 Gallon igloo cooler mash Tun with Stainless Steel false bottom.

Stainless tube to ball valve.

The converted igloo makes all grain home brewing a breeze.

99-2683
$109.99

10-inch Steel FALSE Bottom

The 10 inch flat false bottom is designed for use in a keg kettle.

It rests in the bottom of the kettle, utilizing the domed bottom of the keg.

A 1/2 inch Stainless Steel pick-up tube connects the false bottom to a compression fitting which connects to the bulk head of your kettle.

This design is recommended in a boil kettle, not a mash tun.

99-2651
$25.00

Keg Kettle FALSE Bottom

PICO style Stainless Steel keg kettle mash tun false bottom.

The 16% open design lends itself to better effeciency and a clearer sparge.

The 2 halves fit snugly into the keg preventing grain leakage while resting on supports above the port.

This allows you to mash in a keg kettle without scorching grains.

99-2653
$99.00

12-inch Cooler FALSE Bottom

12 inch Stainless Steel domed False Bottom are commonly used in 10 Gallon Igloo Coolers.

The 16% open design contributes to better efficiency and a clearer sparge.

Add-on our false bottom assembly which includes all fittings from the false bottom through to the ball valve.

If you are mashing in a cooler, this is the premier false bottom for you.

99-2570
$49.00

Stainless Steel Wort Strainer

Stainless Steel Strainer

Simply place one of these sturdy strainers on top of your fermenting bucket

Transfer your wort through the strainer as it enters the bucket

Stainless steel construction, with wooden handle

Very fine double-mesh screen

C443-BRWFLT4
$42.50

9-inch Cooler FALSE Bottom

9 inch Stainless Steel domed False Bottom are commonly used in 5 Gallon Igloo Coolers.

The 16% open design contributes to better efficiency and a clearer sparge.

Add-on our false bottom assembly which includes all fittings from the false bottom through to the ball valve.

If you are mashing in a cooler, this is the premier false bottom for you.

99-2649
$24.00

Chugger Pumps Center Inlet Stainless Steel Brew Pump

This is the older brother of the Chugger Pump family and comes with all the basic specs as its siblings, but has the added benefit of a larger 3/4" center inlet stainless steel head. Bigger in this case is definitely better. Bigger inlet = easier priming = less chance to run it dry. Comes stock with a 1/20 horsepower motor, can handle liquid up to 250F (120C), and all the materials are FDA Food Compliant. Did we mention yet that the head is made of stainless steel? Yeah, that's pretty cool.

For an ideal setup, add a ball valve to the outlet port so you can throttle down your flow rate which will allow more efficient sparging and cooling.

  • Max Flow of 7 gpm (26.5 lpm)
  • 3/4" male NPT inlet and 1/2" male NPT outlet
  • 2' x 7/8" impeller
  • 4 ft. 115V power chord
  • Stainless Steel head
  • Handles liquids up to 250F (120C)
  • Comes with mounting plate to help integrate into your existing system
  • Pump is NOT self-priming. Don't run dry

GF_CCCENTER
$149.99