Wine Making Systems

Showing 18 products

Blichmann WineEasy Vacuum Press Kit

General Info:

  • Works with all size WineEasy Fermentors
  • Can also be used for degassing your wines before bottling, and even racking your wines with the use of a racking cane

500-0002
$224.99

Blichmann WineEasy Fermentor (20 Gallon)

What's Included:

  • Wine fermentation vessel and press in one product
  • No messy transfers to a secondary fermentation vessel
  • Available in 20, 30, and 55 gallon sizes
500-0006
$549.99

Vacuum Pump & Degassing Kit, Blichmann Engineering

The WineEasy Degassing Kit is a vacuum degassing kit from Blichmann Engineering. No more messing with cumbersome, inefficient stir-type degassers that leave CO2 in solution and cause a mess. With the WineEasy Degassing Kit, professionally degassing your wine is as easy as flipping a switch! A vacuum is placed on wine in a carboy through a special stopper, drawing all carbon dioxide out of solution, leaving your wines still and delicious! Degassing usually takes about 30 minutes, depending on the temperature of your wine. We recommend getting your wine up between 75-80 degrees for fastest results. This is the perfect degassing solution for all winemakers!

NOTE: This product can be used by anyone on any wine for degassing. For those with a WineEasy Fermentor and Piston, the Vacuum Press Kit for WineEasy is recommended for full use with the WineEasy system.

The Degassing Kit comes with the following components:

  • Vacuum pump
  • 5 ft piece of 1/4" OD hard plastic vacuum tube
  • 1/4" X 6" stainless steel vacuum tube
  • #7 two-hole silicone stopper
  • #00 solid tan rubber stopper (used to plug the racking tube hole for degassing)
  • Check valve assembly and with spare check ball and check ball seat

GF_WEDG
$199.99

Leg Extensions for 20 and 30 gallon WineEasy Fermentors, Blichmann Engineering

WineEasy leg extensions from Blichmann Engineering give you a stable stand from which to operate your WineEasy fermentor! This makes it easier to gravity drain free runnings into a secondary carboy if desired. Leg extensions are available for the 20 and 30 gallon WineEasy Fermentors. Not needed or available for the 55 gallon model, as it is too big to be supported by leg extensions.

GF_WEL01
$99.99

Blichmann WineEasy Fermentor (30 Gallon)

What's Included:

  • Wine fermentation vessel and press in one product
  • No messy transfers to a secondary fermentation vessel
  • Available in 20, 30, and 55 gallon sizes
500-0007
$649.99

Blichmann WineEasy Press Piston (20 Gallon)

General Info:

  • For use with the 20 Gallon WineEasy Fermentors
  • Used along with the WineEasy Vacuum Press to press your must from the pomace
  • Sealed environment minimizes oxidation while greatly reducing the risk of contamination
500-0005
$209.99

Blichmann WineEasy Press Piston (30 Gallon)

General Info:

  • For use with the 30 Gallon WineEasy Fermentors
  • Used along with the WineEasy Vacuum Press to press your must from the pomace
  • Sealed environment minimizes oxidation while greatly reducing the risk of contamination
500-0004
$234.99

WineEasy Fermentor, Blichmann Engineering - 30 Gallons

The Blichmann WineEasy Fermentor is truly a state-of-the-art piece of equipment that allows home winemakers to make wines of unparalleled quality! Blichmann has developed the WineEasy as a combined fermentor and press, which is unique and perhaps different than anything else on the market. The primary fermentor, available in 20, 30 and 55 gallons sizes, contains a false bottom that keeps the pomace separate from the must as the free runnings are drained from the fermentor. The grapes can then be pressed with a vacuum press and piston (vacuum press and piston sold separately). Using this method, there is no need to move the pomace to another vessel for pressing, and the must is pressed off the pomace in a sealed environment, minimizing oxidation and possibility of contamination. Pressing is also highly efficient, and cleanup is much easier than on traditional bladder or ratchet presses. It is also done in a manner that does not extract harsh tannins from cracked seeds or stems.

The design is such that the only one vacuum press kit is needed for doing pressing on any of the fermentors; the only thing that is needed is a different sized piston for the different sized fermentors. The vacuum can also be used to transfer and degass before bottling. With all these advantageous features, the Blichmann WineEasy is the perfect choice for home winemakers who want to make world-class wines at home!

Features of the WineEasy:

  • No messy transfer to a secondary fermentor
  • Less risk of contamination and oxidation
  • Less time
  • Easy to use
  • Simple mess-free cleanup
  • Production of consistently superb wines

GF_WEF30
$649.99

WineEasy Fermentor, Blichmann Engineering - 55 Gallons

The Blichmann WineEasy Fermentor is truly a state-of-the-art piece of equipment that allows home winemakers to make wines of unparalleled quality! Blichmann has developed the WineEasy as a combined fermentor and press, which is unique and perhaps different than anything else on the market. The primary fermentor, available in 20, 30 and 55 gallons sizes, contains a false bottom that keeps the pomace separate from the must as the free runnings are drained from the fermentor. The grapes can then be pressed with a vacuum press and piston (vacuum press and piston sold separately). Using this method, there is no need to move the pomace to another vessel for pressing, and the must is pressed off the pomace in a sealed environment, minimizing oxidation and possibility of contamination. Pressing is also highly efficient, and cleanup is much easier than on traditional bladder or ratchet presses. It is also done in a manner that does not extract harsh tannins from cracked seeds or stems.

The design is such that the only one vacuum press kit is needed for doing pressing on any of the fermentors; the only thing that is needed is a different sized piston for the different sized fermentors. The vacuum can also be used to transfer and degass before bottling. With all these advantageous features, the Blichmann WineEasy is the perfect choice for home winemakers who want to make world-class wines at home!

Features of the WineEasy:

  • No messy transfer to a secondary fermentor
  • Less risk of contamination and oxidation
  • Less time
  • Easy to use
  • Simple mess-free cleanup
  • Production of consistently superb wines

GF_WEF55
$849.99

WineEasy Press Piston, Blichmann Engineering - 20 Gallons

The WineEasy Piston is used in conjunction with the WineEasy fermentor and WineEasy vacuum press kit, to press must from the pomace once the free runnings of the wine have been drained after primary fermentation. The WineEasy Piston makes this process quick, efficient and easy, keeping everything in a sealed environment, which minimizes oxidation and possibility of contamination while giving consistent results.The design is such that the piston will not extract extra harsh tannins out of the grape seeds, creating smoother, more palatable wines of incredible quality. The pistons are available in sizes to fit each of the three WineEasy Fermenters (20, 30 and 55 gallon).

Note: Only one Press Piston is needed per fermentor size. So, if you have two of the 20 gallon WineEasy fermentors, you would only need one of the 20 gallon Press Pistons.

GF_WEP20
$209.99

WineEasy Press Piston, Blichmann Engineering - 55 Gallons

The WineEasy Piston is used in conjunction with the WineEasy fermentor and WineEasy vacuum press kit, to press must from the pomace once the free runnings of the wine have been drained after primary fermentation. The WineEasy Piston makes this process quick, efficient and easy, keeping everything in a sealed environment, which minimizes oxidation and possibility of contamination while giving consistent results.The design is such that the piston will not extract extra harsh tannins out of the grape seeds, creating smoother, more palatable wines of incredible quality. The pistons are available in sizes to fit each of the three WineEasy Fermenters (20, 30 and 55 gallon).

Note: Only one Press Piston is needed per fermentor size. So, if you have two of the 20 gallon WineEasy fermentors, you would only need one of the 20 gallon Press Pistons.

GF_WEP55
$264.99

Blichmann WineEasy Fermentor (55 Gallon)

What's Included:

  • Wine fermentation vessel and press in one product
  • No messy transfers to a secondary fermentation vessel
  • Available in 20, 30, and 55 gallon sizes
500-0008
$849.99

Blichmann WineEasy Press Piston (55 Gallon)

General Info:

  • For use with the 55 Gallon WineEasy Fermentor
  • Used along with the WineEasy Vacuum Press to press your must from the pomace
  • Sealed environment minimizes oxidation while greatly reducing the risk of contamination
500-0003
$264.99

Vacuum Press Kit for WineEasy Fermentors, Blichmann Engineering

The Vacuum Press Kit for Blichmann's WineEasy is the driving force behind the WineEasy system that allows vintners to easily press the remaining wine from the pomace with just the right pressure (14 psi). At this pressure, the maximum amount of wine is extracted without disturbing or crushing seeds and stems, leaving harsh tannins out of the wine! Only ONE vacuum press kit is needed, no matter how many WineEasy fermentors you have!

In addition, this vacuum press kit can be used for degassing your wine. Placing a vacuum on wine in the carboys will draw carbon dioxide out of solution, leaving still, professional grade wine for you and yours to enjoy! The included stainless steel racking cane can also be used with the system. Harnessing the power of Blichmann's vacuum pump, wine can be drawn from one vessel to another with the simple flick of a switch! No more lifting of heavy carboys, just let the vacuum pump do all the work for you. Required for the WineEasy, the Vacuum Press Kit will simplify every aspect of your winemaking process! The kit comes with the following components:

  • Vacuum pump
  • 1/4" NPT X 1/4" tube connector (white plastic)
  • 1/4" NPT X 1/4" NPT brass hex coupling
  • Hose clamps x 2
  • 1/2" barb X 1" tri-clamp fitting
  • 6 ft piece of 1/2" ID vinyl hose
  • 5 ft piece of 1/4" OD hard plastic vacuum tube
  • 1/2" stainless steel racking cane
  • 1/4" X 6" stainless steel vacuum tube
  • #7 two-hole silicone stopper
  • #7 solid silicone stopper
  • #00 solid tan rubber stopper (used to plug the racking tube hole for degassing)
  • Check valve assembly and with spare check ball and check ball seat
  • Cone spring for racking cane

GF_WEVP
$224.99

WineEasy Fermentor, Blichmann Engineering - 20 Gallons

The Blichmann WineEasy Fermentor is truly a state-of-the-art piece of equipment that allows home winemakers to make wines of unparalleled quality! Blichmann has developed the WineEasy as a combined fermentor and press, which is unique and perhaps different than anything else on the market. The primary fermentor, available in 20, 30 and 55 gallons sizes, contains a false bottom that keeps the pomace separate from the must as the free runnings are drained from the fermentor. The grapes can then be pressed with a vacuum press and piston (vacuum press and piston sold separately). Using this method, there is no need to move the pomace to another vessel for pressing, and the must is pressed off the pomace in a sealed environment, minimizing oxidation and possibility of contamination. Pressing is also highly efficient, and cleanup is much easier than on traditional bladder or ratchet presses. It is also done in a manner that does not extract harsh tannins from cracked seeds or stems.

The design is such that the only one vacuum press kit is needed for doing pressing on any of the fermentors; the only thing that is needed is a different sized piston for the different sized fermentors. The vacuum can also be used to transfer and degass before bottling. With all these advantageous features, the Blichmann WineEasy is the perfect choice for home winemakers who want to make world-class wines at home!

Features of the WineEasy:

  • No messy transfer to a secondary fermentor
  • Less risk of contamination and oxidation
  • Less time
  • Easy to use
  • Simple mess-free cleanup
  • Production of consistently superb wines

GF_WEF20
$549.99

WineEasy Press Piston, Blichmann Engineering - 30 Gallons

The WineEasy Piston is used in conjunction with the WineEasy fermentor and WineEasy vacuum press kit, to press must from the pomace once the free runnings of the wine have been drained after primary fermentation. The WineEasy Piston makes this process quick, efficient and easy, keeping everything in a sealed environment, which minimizes oxidation and possibility of contamination while giving consistent results.The design is such that the piston will not extract extra harsh tannins out of the grape seeds, creating smoother, more palatable wines of incredible quality. The pistons are available in sizes to fit each of the three WineEasy Fermenters (20, 30 and 55 gallon).

Note: Only one Press Piston is needed per fermentor size. So, if you have two of the 20 gallon WineEasy fermentors, you would only need one of the 20 gallon Press Pistons.

GF_WEP30
$234.99

Blichmann WineEasy Vacuum Degassing Kit

General Info:

  • Used to degass your wines before bottling
  • Extremely easy to use
  • Includes pump, check valve, hoses, and stoppers
500-0001
$199.99