Boil Coils & Heat Sticks

Electric heating coils and immersion heat sticks for boiling wort in brew kettles.

Showing 16 products

BoilCoil 10 Gallons - 120 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 10 gallon version was designed to fit perfectly inisde an existing Blichmann 10 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 10 gallon 120v BoilCoil comes with a twist & lock L5-20 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 120v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 120v
Recommended GFCI Breaker Size: 20 amps
Power: 2250W
Min Operation Water Volume: 3 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L5-20P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-10-120V
$139.99

BoilCoil 20 Gallons - 240 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The 240 volt version of the BoilCoil provides more power and thus quicker heating times so you can get your brew day going sooner! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 20 gallon version was designed to fit perfectly inisde an existing Blichmann 20 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 20 gallon 240v BoilCoil comes with a twist & lock L6-30 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 240v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 240v
Recommended GFCI Breaker Size: 30 amps
Power: 5000W
Min Operation Water Volume: 5 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-20-240V
$169.99

BoilCoil 30 Gallons - 240 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The 240 volt version of the BoilCoil provides more power and thus quicker heating times so you can get your brew day going sooner! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 30 gallon version was designed to fit perfectly inisde an existing Blichmann 30 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 30 gallon 240v BoilCoil comes with a twist & lock L6-30 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 240v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 240v
Recommended GFCI Breaker Size: 30 amps
Power: 5750W
Min Operation Water Volume: 7 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-30-240V
$184.99

BoilCoil 15 Gallons - 240 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The 240 volt version of the BoilCoil provides more power and thus quicker heating times so you can get your brew day going sooner! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 15 gallon version was designed to fit perfectly inisde an existing Blichmann 15 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 15 gallon 240v BoilCoil comes with a twist & lock L6-30 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 240v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 240v
Recommended GFCI Breaker Size: 30 amps
Power: 4500W
Min Operation Water Volume: 4 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-15-240V
$159.99

BoilCoil 55 Gallons - 240 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The 240 volt version of the BoilCoil provides more power and thus quicker heating times so you can get your brew day going sooner! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

NOTE: Blichmann reccomends two coils for use as a boil kettle. For a hot liquor tank, one coil will suffice.

The 55 gallon version was designed to fit perfectly inisde an existing Blichmann 55 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 55 gallon 240v BoilCoil comes with a twist & lock L6-30 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 240v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 240v
Recommended GFCI Breaker Size: 30 amps
Power: 5750W
Min Operation Water Volume: 7 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-55-240V
$199.99

BoilCoil 7.5 Gallons - 120 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 7.5 gallon version was designed to fit perfectly inisde an existing Blichmann 7.5 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 7.5 gallon 120v BoilCoil comes with a twist & lock L5-20 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 120v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 120v
Recommended GFCI Breaker Size: 20 amps
Power: 2000W
Min Operation Water Volume: 2.5 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L5-20P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-7-120V
$124.99

BoilCoil 10 Gallons - 240 Volt, Blichmann Engineering

Join the electric brewing revolution! From Blichmann Engineering comes the BoilCoil, a less than ultra-low density work of modern brewing technological art! The 240 volt version of the BoilCoil provides more power and thus quicker heating times so you can get your brew day going sooner! The BoilCoil fits on the inside of a brew kettle and offers unparalleled heating performance for heating up your wort or brewing liquor quickly and efficiently! No more open flames to deal with, the BoilCoil makes electric brewing easy and can be used in either an indoor or outdoor brewing setup! This is an ideal product for your boil kettle and hot liquor tank, and is a great companion for your existing Blichmann BoilerMaker brew pot. The BoilCoil is NOT DESIGNED to be used with a false bottom as a mash tun!

The 10 gallon version was designed to fit perfectly inisde an existing Blichmann 10 Gallon BoilerMaker (G1 and G2). Installs easily by drilling two small 5/8" holes into your brew pot, using the included handy drill template! Don't own a BoilerMaker, but still want to use the BoilCoil with another type of brew kettle? No problem! Click the following link for a drawing with sizes of the BoilCoil to find out what size will work for your pot: BoilCoil Sizing »

IMPORTANT ELECTRICAL INFO PLEASE READ!!!
This 10 gallon 240v BoilCoil comes with a twist & lock L6-30 style plug that is designed to plug into a controllor or switch for use. Blichmann offers their 240v electric control module, which is the perfect controller for this BoilCoil! Using the temperature sensor that comes with their control module, you can adjust temperature or output power. PLEASE NOTE that you absolutely must have a controller of some sort to use the BoilCoil, and the BoilCoil cannot be plugged directly into a wall receptacle.

Rated Voltage (VAC): 240v
Recommended GFCI Breaker Size: 20/30 amps
Power: 3750W
Min Operation Water Volume: 3 gallons

  • Each BoilCoil is engineered to perform optimally in your BoilerMaker brew pot for consistent heating performance, boil quality, and boil-off rates.
  • Coil configuration hugs the wall of the pot to encourage convective boil characteristics to drive off DMS and other volatiles and doesn't interfere with whirlpooling.
  • LESS THAN Ultra low watt density means NO chance of scorching!
  • Removable custom engineered plug means cleaning is a snap - no dangling power cord tethered to your pot!
  • The BoilCoil includes a high quality flexible "plug and play" 12 ft. factory wired cable with a molded twist-lock L6-30P plug on one end, and our custom removable plug on the other end.
  • Simple installation requires drilling only two small 5/8" holes with our handy drill template (no risky welding). Features a professional and reliable connection and sealing system engineered specifically for homebrew kettles.
  • The BoilCoil will fit in most competitive pots too!

GF_BOILCOIL-10-240V
$149.99

Bucket Water Heater

The Premier Line 742G Bucket Water Heater

Used to heat sparge and mash water in a bucket

This product is manufactured in United States

Designed to continuously heat buckets of water

1000 watt, 120 volt power will heat water over 150

B000BDB4UG
$48.87