|
|
 |
 |
Strainers & Filters |
Browse our selection of strainers and filters For Home Brewing. Strainers and Filtration Systems clear Stray Hops and Grains for cleaner Home Brews. |
|
|

 |
- Filter like the Pros, only on a smaller scale
- Most small breweries and wineries use a large plate filter system to achieve clear beer or wine
- Now you can do the same at home
- Our new Plate Filter has a larger surface area, which means more yeast and particulate extraction
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $49.95* |
$N/A* |
N/A* |
2.00 lbs* |
N/A* |
Yes* |
|
|
|

 |
- The beer filter gets installed inline between two Cornelius kegs using CO2 pressure to push the beer out of the full keg through the filter and into the clean keg
- This kit is designed to filter out particles down to 1 micron, which is considered fine filtration
- At one micron the beer will be clear after filtration provided you do not have a starch haze
- Filtering also accelerates the conditioning process to just a few days
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $49.95* |
$N/A* |
N/A* |
2.50 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters
- These pads are not designed to be back flushed and reused and should be used in one session
- Our Beer and Wine Plate Filter Kit has a larger surface area, which means more yeast and particulate extraction than our cartridge filter, and comes with our plate filter, two disposable filter pads, tubing, flare fittings, and two flare beverage ball locks
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $62.95* |
$N/A* |
N/A* |
2.20 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Filter your tap water and eliminate that no-win decision of should I buy expensive bottled water or use the chlorinated water from the tap
- This water filter kit features a 10 inch carbon block filter that removes all chlorine and organic flavor
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $42.95* |
$N/A* |
10 inch Filter Kit* |
3.00 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Has a larger diameter opening than the 8 inch funnel which allows for faster pouring
- When using the funnel to pour wort into a 5, 6, or 6.5 gallon carboy, you will need another person to steady the funnel
- The funnel bottom does fit into the carboy however when pouring it will become top heavy, if not supported, and tip over
- If you are looking for a one person operation you will want the 8 inch funnel
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $7.25* |
$N/A* |
N/A* |
.50 lbs* |
N/A* |
Yes* |
|
|
|

 |
- These pads will provide between .5 - 1 Micron filtration
- Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters
- These pads are not designed to be back flushed and reused and should be used in one session
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $3.50* |
$N/A* |
N/A* |
.15 lbs* |
N/A* |
Yes* |
|
|
|

 |
- These pads will provide between .3 - .5 Micron Sterile filtration
- Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters
- These pads are not designed to be back flushed and reused and should be used in one session
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $3.60* |
$N/A* |
N/A* |
.15 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Remove chlorine and organic flavor with this 10 in. carbon block filter
- Also filters out sediment to 10 micron
- We open the housing after use and store filter dry to eliminate algae from growing inside the housing
- Designed to work with our filter housing or any other standard, 10 in. housing
- Good for 750 gallons
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $8.25* |
$N/A* |
10 inch Filter Kit* |
0.94 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Our spun-polypropylene filters are designed to use with one of our Beer and Wine Filtering Kits
- Spun-polypropylene filters are disposable filters and cannot be effectively cleaned for reuse
- However, you can filter multiple kegs with one filter cartridge
- Most customers report being able to filter 10-15 gallons of product, however you should be aware that your results will vary depending on the cloudiness of your beer or wine
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $4.75* |
$N/A* |
N/A* |
0.38 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Prevent spillage and overflowing with this uniquely designed funnel with high back splash
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $10.25* |
$N/A* |
N/A* |
2.00 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Fits in either our 8 or 10 inch funnels
- This is a disc made of fine mesh nylon
- We do not recommend them for most brewing applications because they will clog easily and then can be an unsanitary mess to clean during mid-process
- They are best used in wine making for removing seeds, stems, etc
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $4.50* |
$N/A* |
N/A* |
0.15 lbs* |
N/A* |
Yes* |
|
|
|

 |
- These pads will provide between 5-7 Micron filtration
- Each filter pad set is good for approximately 5 gallons of beer when the beer has been filtered by the previous size pads or you are starting with the rough filters
- These pads are not designed to be back flushed and reused and should be used in one session
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $3.50* |
$N/A* |
N/A* |
.15 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Spun-polypropylene filters are disposable filters and cannot be effectively cleaned for reuse
- However, you can filter multiple kegs with one filter cartridge
- Most customers report being able to filter 10-15 gallons of product, however you should be aware that your results will vary depending on the cloudiness of your beer or wine
- 5-10 micron is considered rough filtration, 3 micron will remove most yeast, 1 micron filtration will remove almost all yeast, and .5 micron is nearing sterile filtration
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $4.75* |
$N/A* |
10 inch Filter Kit* |
0.38 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Ideal for 5 gallon size batches
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $3.45* |
$N/A* |
N/A* |
.25 lbs* |
N/A* |
Yes* |
|
|
|

 |
- This is just the 10 in. Housing found on the 10 in. Filter Kit
- It has 1/2 in. FPT on both the in and out of the housing
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $28.95* |
$N/A* |
10 inch Filter Kit* |
2.00 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Gasket for 10 inch Filter Housing
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $1.50* |
$N/A* |
for 10 inch filter* |
0.01 lbs* |
N/A* |
Yes* |
|
|
|

 |
- Get organized in your brew area and mount your water or beer filter assembly to a wall or directly to your system
- Brackets are designed to mount to the top of the canister housing
- Screws not included
- You must use self tapping screws(easily found at hardware stores) on the filter top
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $2.95* |
$N/A* |
N/A* |
0.25 lbs* |
N/A* |
Yes* |
|
|
|

 |
- New to the Blichmann Engineering lineup is the patent pending HopBlocker boil kettle filtration system
- The HopBlocker will filter 90-95% of the break material and hops out of your wort without plugging
- While it is designed specifically for BoilerMaker pots, it can be installed in any manufacturers pot or keg
- Instructions provided
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $59.99* |
$N/A* |
N/A* |
N/A lbs* |
N/A* |
No* |
|
|
|

 |
- Polarware Stainless Steel Strainer
- Simply place one of these sturdy strainers on top of your fermenting bucket, and transfer your wort through the strainer as it enters the bucket
- Stainless steel construction, with wooden handle
- Very fine double-mesh screen
- Works well for hops, grain etc.
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $9.99* |
$N/A* |
8 inch D* |
N/A lbs* |
N/A* |
No* |
|
|
|

 |
- Welded hops screen slips right onto your racking cane or keg dip tube to filter out fruit or dry hops from the fermenter
- Great to keep whole hops and trub out of the kettle
- Makes it possible to do your dry hopping directly in the keg
- Made of stainless steel
- Easy to sanitize
- Works best with whole hops
|
| Sale Price |
Retail Price |
Dimensions |
Weight |
Warranty |
Free Shipping |
| $3.00* |
$5.00* |
4.25H x 1/8W x 1/8D inches* |
N/A lbs* |
1 Year* |
No* |
|
|
*When you click on the "More Info" button you
can read about the latest Strainers & Filters. |
|
|
advertisement
 |
|