Kegging Equipment

Basic Homebrew Draft System More Details
	A complete setup for dispensing your homebrew like the pros. There are several advantages to a kegging system. The number one reason is that you no longer have to clean bottles. You will also enjoy drawing your own beer from your own keg. Your friends won't mind either! This system is designed to include absolutely everything you need to dispense your homebrew on draft. The CO2 tanks are shipped empty.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $185.99* $N/A* N/A* 20.50 lbs* N/A* Yes*

Tap-A-Draft HomeBrew Kegging Kit More Details
	Tap-A-Draft Homebrew Setup Kit Includes: 1 Valve, 3 Six-liter Bottles, 3 Caps, and 10 8gram CO2 Cartridges. The best miniature kegging set up we have used. The Tap-A-Draft allows you to serve any carbonated beverage with all the benefits, and without all the expense of costly, bulky CO2 Tanks and Regulators. Kit contains 3 brown bottles, holding 1.5 gallons each.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $69.95* $N/A* N/A* 4.00 lbs* N/A* Yes*

Cornelius Keg - Gaskets Replaced More Details
	These are reconditioned 5-gallon capacity, ball lock kegs with rubber tops and bottoms (color may vary). The interior and exterior are washed and rinsed and all gaskets are replaced to ensure that no soda flavor or residue is left behind. We do not replace relief valves or poppets, however these can be purchased separately. Kegs are pressure tested and are guaranteed to be holding pressure upon delivery.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $49.95* $N/A* 9 in.Diam. x 25 in. Height* 11.00 lbs* N/A* Yes*

Tap-A-Draft HomeBrew Valve System More Details
	The Tap-A-Draft allows you to serve any carbonated beverage with all the benefits, and without all the expense of costly, bulky CO2 Tanks and Regulators. The Tap-A-Draft unit is a patented beverage dispensing system that uses 8-gram CO2 cartridges regulated to 15psi to push out the carbonated beverage. The valve works in conjunction with the 6-liter and 3-liter bottles. The size of the system set up with a 6-liter bottle is 17 in. long with the widest point being 6.25 in. diameter. This size makes this perfect for most refrigerators, camping, parties, etc...
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $42.95* $N/A* 17 in. long and 6.25 in. diameter* 0.25 lbs* N/A* Yes*

Tap-A-Draft 1.5 Gallon Bottle More Details
	Reusable 6-liter (1.5gallon) brown bottle. The bottles are 14 in. from end to end, and 6.25 in. diameter with a 38mm (Standard 3-liter bottle) finish. Depending on what is put in them and how they are cleaned to how long they will last. We estimate around 8-10 refills for the average user. Screw on lids are sold separately.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $8.95* $N/A* 14 in. H X 6.25 in. D* N/A lbs* N/A* Yes*

Cornelius Keg - Gaskets Not Replaced More Details
	A great price on an unrebuilt keg. You can purchase the rebuilt kit and replace the gaskets yourself (very easy job) and save some money. These kegs will have residual soda syrup inside and will need to be cleaned. To totally rebuild the keg you should also consider a new relief valve and poppets. PBW works as a great cleaner for eating away sticky residual soda residue. Kegs are sold as is.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $32.95* $N/A* N/A* 11 lbs* N/A* Yes*

Tap-A-Draft CO2 12 Pack More Details
	Works with the Tap-A-Draft set-up.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $9.95* $N/A* N/A* .50 lbs* N/A* Yes*

Sanke Valve Removal Tool More Details
	For removing The Valve and spear on American Sanke kegs. Should be used in conjunction with a Sanke knife.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $79.00* $N/A* N/A* 4.0 lbs* N/A* Yes*

5 Gallon Keg Parka More Details
	Constructed of durable Neoprene, this Keg Parka is sure to keep your beer cold for hours. Fits right over any 5 gallon keg and can be taken anywhere. This is perfect for parties, picnics, or anytime the keg is out of the fridge, as it will help maintain a cold temp in your keg for up to 4 hours at 70 degrees! Toss a few ice packs in there and you have even colder beer. Please note: Keg not included.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $32.95* $N/A* N/A* 1.20 lbs* N/A* Yes*

Cornelius Keg Lid New More Details
	For use with Cornelius and Firestone kegs. Comes with a pull-ring pressure reliefe valve.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $19.95* $29.95* N/A* 0.56 lbs* N/A* Yes*

Gas Tubing Line Assembly More Details
	Includes ball lock gas in quick disconnect, line and two hose clamps.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $8.95* $N/A* N/A* .49 lbs* N/A* Yes*

Gas Add On Assembly More Details
	Use this assembly to tee off from your CO2 system to add another keg to your existing draft system. Includes a Ball lock gas in quick disconnect.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $11.95* $N/A* N/A* .38 lbs* N/A* Yes*

Corny Lid Welded Tab More Details
	This is THE product to use for aging your beer on oak cubes, dry hopping, adding cacao nibs - any post-keg addition of ingredients you can think of! We have welded on a tab on the underside of a normal, used keg lid. To use, simply thread the string of your hop bag into the hole and tie off. When it is time to remove your adjunct/hops, pull the lid off of the keg and replace with a normal one. This really enables you to control the exact time your beer sits on the hops, oak, etc. and makes their removal a cinch!
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $24.95* $36.95* N/A* 1.00 lbs* N/A* Yes*

Tap-A-Draft HomeBrew Bottle Lid More Details
	Lid for the Tap-A-Draft Bottle.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $0.50* $N/A* N/A* .01 lbs* N/A* Yes*

Beer Dispensing Line Assembly More Details
	Includes ball lock beverage out quick disconnect, line, hand held faucet and two hose clamps. 5 ft of 3/16 in. line.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $13.95* $N/A* N/A* 0.45 lbs* N/A* Yes*

Rebuild Kit Cornelius Keg More Details
	Includes two gaskets for the dip tubes, two for the body connects and one for the lid o-ring. Any keg that has been used for soda in the past should have its gaskets replaced because the soda flavor can never be removed from the rubber. These kits work for Ball lock and most Pin lock kegs.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $3.05* $N/A* N/A* 0.04 lbs* N/A* Yes*

Keg Beverage Jumper Line More Details
	Push product or sanitizer from one keg to the next. Two black, beverage quick disconnects with flare fittings attached via a one foot piece of beverage line.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $13.50* $N/A* N/A* .50 lbs* N/A* Yes*

Tap-A-Draft HomeBrew CO2 O-Ring More Details
	This is the small o-ring that goes on the part that pierces the CO2 cartridge. Many times it will get blown out if someone removes the cartridge before the cartridge was really empty, blowing the o-ring off the valve. Also work as a friction o-ring on our sparge arm assembly's on the brew sculptures.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $0.30* $N/A* N/A* 0.00 lbs* N/A* Yes*

Tap-A-Draft HomeBrew Bottle O-Ring More Details
	This is a silicon o-ring that goes between the tap and the bottle.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $0.70* $N/A* N/A* 0.01 lbs* N/A* Yes*

Sanke Ring Removal Knife More Details
	This knife is used to remove the small locking ring from the top of a Sanke keg in order to remove the whole spear assembly. Should be used in conjunction with the Valve and Spear Removal Tool.
Sale Price Retail Price Dimensions Weight Warranty Free Shipping $7.99* $N/A* N/A* .30 lbs* N/A* Yes*

Top   Prev      1 2       Next   Last     1 to 20 of total 23 found

*When you click on the "More Info" button you can read about the latest Kegging Equipment.