Keg Dispensing Supplies

Brilliant! A small brush that fits over the end of your cap and kills two birds with one stone: keeps your faucet clean, and keeps flies out! When the heat of summer comes around and old beer heats up in the metal interior of your faucet, flies start hovering around. And what is worse than getting a cup of beer full of flies? Protect your beer by having a faucet plug with brush that scrubs out the inside of your tap and keeps flies out!

Want to pour the perfect stout or nitro beer every time? With the stout faucet assembly, you'll be able to add a stout faucet to your kegerator that pours a rich, creamy head on all nitrogenated or beer gas beers. Perfect for Guinness or Guinness clone beers, but can be used with a range of beer gas beers or beers on nitro, such as the nitrogenated IPAs and Imperial Red Ales that have become popular as of late.

Assembly Includes the Following:
Stout faucet (Chrome plated body with a stainless spout and stainless restrictor plate).
Faucet knob
Chrome-plated 4 1/8 in. shank with 3/16 in. bore
Beer nut, neoprene washer and 3/16 in. tailpiece

Get this assembly, add it to your kegerator or keezer system, and impress all your friends with perfect pours every time!

This Bevlex tubing measures 1/2" inner diameter, making it perfect for use with a 1/2" racking cane or large auto-siphon. The thicker walling is kink-resistant, and is perfect for more rigorous applications. Some people have been known to use this tubing for racking using a vacuum pump, and others just prefer it to thin-walled tubing because of its durability. Whatever you use it for, we've got it here for you!

Inner Diameter: 1/2 in.
Outer Diameter: 3/4 in.

You can never have too many disconnects! For all your ball lock draft needs, Great Fermentations offers you these gas ball lock disconnects. Easy to take apart and clean, these are used with 5/16" ID Bevlex tubing on manifolds and splitters to carbonate multiple kegs at once. These disconnects have a 1/4" MFL connection, which is perfect for attaching a swivel nut set for myriad applications. They have a plastic end on the male flare fitting so you don't have to use a plastic flare fitting washer when connecting them to metal. Make sure you have enough on hand for all the kegging and draft projects your mind can come up with!

Oetiker clamps provide a permanent clamping solution! This style of clamp has a 1-ear design, which means they are crimped at a single point on the clamp to create a superior seal over your tubing. These large Oetiker clamps are often used on 5/16" thick-walled tubing that is used in CO2 connections on kegging and draft systems. These clamps hold tight, creating a great seal that holds for a long time! Some people prefer these for more permanent systems. If you are looking to switch over to a snug seal that lasts, make sure you use Oetiker clamps!

Beer nuts are a standard hex nut used on many beer dispensing connections. Most notably, they are used on the end of faucet shanks and on sanke couplers. They accept a standard tailpiece, such as a 3/16" tailpiece for liquid applications or a 5/16" tailpiece for CO2 applications. In addition, neoprene beer washers are also used in conjuction to create a seal. These are nickel plated brass hex nuts with a 7/8" x 14 straight pipe thread that is standard in the U.S. beer industry. Always keep a few of these on hand for any situation that may arise!

Have you ever damaged a gauge on your CO2 regulator? We've got the replacements you need! This is a left-hand threaded replacement tank pressure gauge for your CO2 regulator. These come standard on dual gauge regulators, and this one works with regulators that take a left-hand threaded gauge.

Have you ever damaged a gauge on your CO2 regulator? We've got the replacements you need! This is a right-hand threaded replacement tank pressure gauge for your CO2 regulator. These come standard on dual gauge regulators, and this one works with regulators that take a right-hand threaded gauge.

Change out all your standard o-rings on a cornelius keg with this o-ring replacement set! This comes with one center closure o-ring, two post o-rings, and two dip tube o-rings. These are all the standard o-rings that come on a Cornelius keg. Change these out periodically, when your connections get hard to make or when your o-rings begin to fray. Always handy to have on hand in case of a kegging emergency!

Have you ever damaged a gauge on your CO2 regulator? We've got the replacements you need! This is a right-hand threaded replacement output pressure gauge for your CO2 regulator. It measures output pressure between 0 and 60 PSI and works with regulators that take a right-hand threaded gauge.

This is the part that really gets the beer flowing! Chrome-plated brass construction ensures for longevity of the coupler, so that you can keep the beer flowing keg after keg. This "D" style coupler is the standard coupler used by virtually all American and Canadian breweries, and as such, this is the most convenient keg coupler to own in North America. One of these allows you to tap almost any keg from any American or Canadian breweries. This coupler comes with a standard 5/16" gas barb, check valve and beer nut on the gas side. Not included with this coupler are the neoprene washer, 3/16" barb liquid tailpiece and beer nut.

Standard faucets are just that...standard faucets for pouring beer! They come standard with a number of kegerators and dispensing setups, and can be found on jockey boxes, homemade beer fridges and keezers, just about anywhere you find beer! Economical, they are easy to take apart and clean, with just a few moving parts that can easily be replaced if needed. These make great replacement faucets for damaged faucets on existing setups, or work well on new installations as well! These can be put on the end of a shank for a new installation.

Taprite has long been a trusted name in the beverage industry. Known for their high quality craftsmanship, Taprite has one of the best regulators on the market! These dual guage regulators have a low pressure gauge which shows output pressure (supports 0 - 50 PSI), and a high pressure gauge that shows the remaining pressure in the cylinder. Taprite regulators are known for having high quality diaphragms which stand up to the test of time much better than cheaper or lower-quality regulators, as well as being more accurate for a longer period of time. The regulator also includes a standard CO2 barb with shutoff valve and a safety check.

These check valves are the perfect solution to backflow issues that you may be having. They go on the gas side of a ball or pin lock gas system. They have an integrated back check valve that helps prevent flow from reversing, and fit on the 1/4" MFL fitting found on most standard ball or pin lock disconnects. Keep your gas lines clean with these as a preventative measure.

Long and narrow, the dip tube brush was made specifically for cleaning out keg dip tubes. Being long and narrow themselves, dip tubes can be tricky to clean properly without the right tool. Cleaning out a dip tube with a dip tube brush ensures that you scrub the whole inner surface of the dip tube, where bacteria and beer stone can easily hide. These brushes are also good for cleaning sight glasses and other narrow brewing equipment. Another brush highly recommended to anyone who owns a keg!

Do you use a lot of Oetiker clamps to tighten your connections? Or would you like to switch your connections over to Oetiker style and have a more permanent clamp on your liquid and gas connections? A crimper of your own would come in extremely handy! While oetiker clamps can be crimped with a set of pliers, the crimping can be difficult and uneven. This crimper clamps Oetiker-type clamps down with ease and precision, ensuring a perfect crimp every time! A must-have for anyone doing projects that use Oetiker-style clamps!

These quick connects come in handy for quickly connecting to and disconnecting from connections of all kinds! This is the male side that has a black gasket that allows it to quickly connect to the female end. It has a 3/8" straight barb to hook up to 3/8" ID tubing. It has a temperature tolerance range from -40 to 180F and a vacuum pressure tolerance of 120 PSI. This male piece is used with the Female 3/8"In-line Hose Barb, item #05P01-121.

From Johnson Controls, a trusted name in temperature control and thermostats, comes this handy external thermostat that can be used to keep your beer at just the right temperature! The unit consists of a probe that goes into your cooling device (refrigerator or freezer), an analog thermostat that ranges between 20 and 80 degrees Fahrenheit, and a power cord with plug outlet for the cooling device. Simply place the probe on the inside of your cooling device, plug your device into the unit, and set your temperature. Done! The unit will interrupt power to the cooling device when the temperature goes too far out of range of the set temperature.

Note: that there is a 3 ½ degree differential between the set point and the actual temperature. However, this range should have minimal effect on the actual beer temperature. Using this control, homebrewers have been able to make excellent lagers all year round, cold crash their beers, and so much more!

The "G" type coupler is sometimes known as a Bass keg coupler or tap. This is the style of coupler used on Bass, Boddington's, Anchor, Grolsch, Old Speckled Hen, Innis & Gunn and Watney's kegs, among others. Without this style of coupler, it may be hard to get beer out of kegs from those breweries! This coupler comes with the gas side connections, but does not come with the 3/16" liquid tailpiece, beer nut or neoprene washer needed for the liquid side.