Keg Dispensing Supplies

The following beer keg dispensing equipment allows you to dispense and serve homebrew without all the hassle of bottles. Choose from homebrew kegerators, homebrew keg dispensing systems or portable homebrew setups.

Showing 21 products

German Slider "A" Coupler

German beer lovers rejoice! This "A" style German slider keg coupler, also known as a tap, is just what you need to get beer flowing from German kegs! This coupler is like no other, with a cupped mount that slides onto the keg and locks in place when engaged. This is the most widely used keg coupler in Germany, and while it will not work with all German beer kegs, it does work with most of them, as well as with a few Belgian kegs. Among the breweries that use the "A" coupler are Ayinger, Achouffe, Bitburger, Franziskaner, Hacker-Pschorr, Hoegaarden, Paulaner, Spaten, and Warsteiner. This coupler comes with the gas side connections, but does not include the liquid side connections which consist of a 3/16" liquid tailpiece, a beer nut and a neoprene washer.

GF_07S07-130
$84.99

Party Pig Valve Assem with gasket

Party Pig Valve Assem with gasket

GF_30-0003
$8.99

Stainless Steel Standard Beer Faucet

Finally, a standard faucet made of above-standard material! These standard faucets are anything but standard, with full stainless steel bodies and levers. Stainless steel is the holy grail of beer materials! Sleek and stylist, it not only looks great, but is durable and will last longer than chrome or brass faucets. The simple design means that the faucets are easy to take apart and clean. For beer faucets that will last longer, stainless steel faucets can't be beat!

GF_C203
$39.99

6" Shank with 3/16" Bore

Beer shanks to make all your dispensing dreams come true! These chrome plated brass shanks are used in a variety of setups to create draft systems. A 3/16" bore is perfect for liquid dispensing of all types, including sweet sweet beer. This 6" shank (actual measurement: 6 1/8") is longer than the standard 4" shank and works when you need just a little more length. Simply drill out your hole, place your shank through, and lock in place with the included lock nut. A faucet can then be attached to the outside of your draft setup, whether it be a kegerator, keezer or jockey box! Also needed on the inside is a 3/16" tailpiece, neoprene beer washer and beer nut.

GF_12K09-105
$24.99

Aluminum 3 Way Manifold w/Checks

A 3-way manifold is the perfect way to carbonate three kegs at once, or to pressurize kegs and run a Blichmann BeerGun at the same time! The CO2 can be hooked up from the regulator via the barb on the side of the manifold using standard 5/16" ID Bevlex tubing and worm clamps, and the other barbs can be run with the same tubing to gas disconnects for carbonating and dispensing from kegs, or to other CO2 driven devices. When mounted, the barbs run straight downward. Includes shutoff valves on the three top barbs on the manifold, which give another level of protection from lost CO2!

GF_03C03-433
$43.99

Collar for Perl Faucet - Chrome

Chrome replacement collar for the Perlick Perl faucet.

GF_12G09-199
$7.49

Faucet Knob

The faucet knob is the handle part of your faucet assembly. These black faucet knobs are 2.75 inches long and screw into the lever post just above the bonnet, giving you a way to get a handle on your beer! Make sure you have one of these for each of your faucets so you can pour pints for your friends and family.

GF_12G09-126
$2.99

Showing 295 - 315 of 668 results