The following beer keg dispensing equipment allows you to dispense and serve homebrew without all the hassle of bottles. Choose from homebrew kegerators, homebrew keg dispensing systems or portable homebrew setups.
This is a replacement black lever washer for standard faucets. It goes on top of the white faucet shaft washer on the faucet lever of a standard faucet. Washers wear out over time, and used equipment that has not been properly maintained may need new washers. If this is the case, Great Fermentations has replacements for you!
For tapping American and Canadian kegs economically! This economy US sanke coupler is manufactured by Krome and will fit standard American and Canadian kegs requiring a "D" style connection. This coupler, popularly known as a tap, comes with the gas side connections. Not included is a 3/16" barbed liquid tailpiece, beer nut and neoprene washer for liquid side connections. If you are looking to dispense beer on a budget, look no further than this economy US sanke coupler!
Party Pig with tray, strap, and 2 pressure pouches
Just what the party ordered! A black picnic tap on one end of a 4-foot length of 3/16 in. ID thick walled tubing and a ball lock disconnect with 3/16 in. swivel nuts on the other. Both ends are attached with oetiker-style clamps, which have been crimped on for a tight connection! Be the life of the party by bringing this (and a full keg) to the next get-together!
The Keg Line Cleaning Kit is the key to keeping your faucets, lines, and couplers clean. This kit includes a hand pump and cleaning solution container that attaches to your faucet shank, a 32 oz. bottle of Superflush Keg and Line Cleaner, a double ended faucet brush and a spanner wrench for removing faucets and attaching the cleaning pump.
Simply mix the Superflush Keg and Line Cleaner at the recommended rate of 2 to 3 oz. per gallon of water and use this solution to soak faucet and coupler parts. Remove the faucet from the shank using the spanner wrench, and attach the cleaning solution container to the shank with the spanner wrench. Pump solution through the liquid line and out into a bucket, then allow solution to sit in the lines for a few minutes. Fill the cleaning solution container with water and pump through to flush lines. Use the double ended brush to clean faucet and coupler, then flush with water and reassemble. Repeat when changing kegs to keep beer flowing free of foaming issues, beer stone buildup and bacterial infection.
Don't give up on that old Perlick faucet, repair it! The Perlick repair kit was made for repairing the internals of a 425 series Perlick faucet, and comes with a stainless steel lever, a stainles steel plunger, and a chrome collar. These should be all the internal parts needed to repair a 425 Perlick. Breathe new life into that faucet with a repair kit!