The following beer keg dispensing equipment allows you to dispense and serve homebrew without all the hassle of bottles. Choose from homebrew kegerators, homebrew keg dispensing systems or portable homebrew setups.
Turn your fridge into a kegerator with our kegerator homebrew kegging system! This system comes with all the internal workings of a kegerator system you will need, except the CO2 cylinder.
Included is a high quality Taprite regulator, ball lock gas line assembly, a brand new 5 gallon cornelius keg, a ball lock liquid disconnect with swivel nut set, 6 feet of 3/16" ID Bevlex thick-walled liquid tubing, and a full stainless steel shank assembly that includes a SS standard beer faucet, faucet knob, 4" SS shank, 1/4" tailpiece, beer nut and neoprene washer. Make the draft system you have always wanted with this kegerator kegging system, complete with a brand spankin' new keg and stainless steel serving equipment!
All you'll need in addition to this kit to make the ultimate kegerator, is a full CO2 tank. For local customers we sell full tanks at all of our retail locations!
Most often used for CO2 connections, these quick disconnects are chrome-plated brass. This is the female side, which has a 3/8" straight barb on one end, while the other end is female and accepts the male end. It has a temperature tolerance range from -40 to 180F and a vacuum pressure tolerance of 120 PSI. This female piece is used with the male piece #04P01-113
Want to make your own kegerator? Have a tower that you need replaced? Great Fermentations offers these 3" beer towers for all your tower needs! This model is a standard 3" model, which works well as a replacement on kegerators that have the same sized tower. It has a single beer faucet attached to the tower. If you are making your own kegerator, you can affix this to the top of a dorm fridge or other small refridgerator. Just like that, you've got yourself a kegerator! The sleek chrome finish looks nice as your pour the perfect beer from the tower. Cheers!
This is a complete shank asembly for your beer tower. It includes a 2" shank, coupling nut for beer faucet. stainless steel flange, plastic inside flange, and lock nut. An elbow can fit in the back of the shank with a compression fitting. Replace your damaged or missing tower shank with this complete tower shank assembly!
Need new o-rings for the inside of your stout faucet? Look no further! Great Fermentations have these o-rings available to you so that you can keep those creamy beers flowing! These o-rings fit in the body of the faucet above the nozzle and keep everything tight and secure. Have a few on hand so you'll always be prepared for the inevitable!
This is a replacement plunger shaft assembly for standard faucets. It joins with the faucet lever and moves back and forth to allow beer to flow from the faucet. If you need a replacement for an old standard faucet, Great Fermentations has one for you!