The Barley Crusher is a trusted name in home grain milling! Their malt mill has adjustable rollers on both ends so that you can get whatever crush you want on your grains and keep the rollers evenly spaced along the length of the mill. The gap default setting is marked and set at .039 at assembly, and adjustment range is from .015 to .070 thousands of an inch. The rollers have a 12 TPI knurl to efficiently pull the grain through the rollers while leaving the hull intact to form an excellent filter bed for sparging.
The included base sits perfectly atop a 5 gallon bucket for crushing, and no adjustment is needed to use this with a 3/8" drill motor. Comes with a crank handle, or can be configured to be used with a drill for faster crushing! Available with a 7 or 15 lb. hopper, dial in your crush AND your brewing with a Barley Crusher Malt Mill!