- Kit design for PID Control. Features circuit structure to control 2 (upto 5500w) elements, 1 at a time as well as 2 pumps. Please check out recommended products for a complete list of parts to build a complete setup. Kit includes all pieces necessary to build a PID controlled electric panel with 2 220v elements and 2 pumps. Uses 2 PIDS. Kit includes: 8 - LEDs (2 white 220v, 2 white 110v, 2 yellow 110v, 1 red 110v, and 1 green 220v) 1 - Emergency Stop locking push button with NC Contact 1 - Extra No contact for E-Stop 4 - 2-Way Switches with 1 NO Contact. For power to PIDs and pumps 1 - 3-Way Switches with 1 NO Contact. For power to element's contactors 1 - Key toggle Switch for panel on/off 3 - 40a Contactors w/ 110v Coils (1 ea for elements, and 1 for control panel power) 2 - 40a Solid State Relays for PID control of elements, includes heatsink 1 meter of DIN rail, cut in either 1/3s (fits enclosure perfectly) or 1/2 20 - Terminal Blocks for wire from 6-24 awg 1 - New style 32a 2 pole DIN Rail Breaker 1 - New style 6a 1 pole DIN Rail Breaker 6 - Terminal block anchoring ends 3 - Terminal block end covers 3 - Terminal block seperators 2 - Terminal block connecting bridge pieces 1 - Wiring diagram with our recommended design 1 - Buzzer View the wiring schematic HERE Recommended additional Hardware: Enclosure PIDs such as the Auber SYL-2362 along with temp probes Outlets for the elements (either via cord grip, flanged outlets, or other type) Outlets for the pumps Plugs for the pump outlets (usually create a jumper to the standard plug) Main power in (flanged inlet or cord grip usually) inlet power connector Optional timer Optional paint Optional tags Highly recommend upgrading to the large heatsink in the kit as well, as the SSR relays used for the elements can get quite warm, and therefore are best mounted so the heat can get away.
Dimensions: N/A
Weight: 0 lbs.
Warranty: N/A
Additional Information:
Free Shipping: N/A
